Filter
Top Products
13 Setting up the Receiver
112 5700/5800 GPS Receiver User Guide
5800 GPS Receiver Operation
• TRIMMARK IIe
• TRIMTALK™ 450S
• SiteNet™ 450
• SiteNet 900
Internal Radio Setup
You can configure the receiver’s optional internal radio using any of the
following software:
• GPS Configurator
• WinFlash
• Trimble Survey Controller
For more information, refer to the GPS Configurator Help, the
WinFlash Help, or the Trimble Survey Controller User Guide.
By default, the internal radio has only a few “test” frequencies installed
at the factory. Use the WinFlash software to program your licensed
frequencies prior to using the receiver. For more information, see
Adding frequencies for the 450 MHz internal radio, page 133.
131.2 Cellular modems and external radios
You can use a cellular modem or external radio instead of the internal
radio as your data communications link.
To connect a cellular modem to a 5800 receiver, you need the following:
• 5800 receiver.
• A cellular modem, or a cellphone that can transmit and receive
data.
• Serial (cellphone to DB9) cable (supplied with the cellular
modem or phone).