Filter
Top Products
5700/5800 GPS Receiver User Guide 135
Software Utilities 16
5800 GPS Receiver Operation
7. In the Edit Frequency field, enter the frequency you require.
8. Click
Add. The new frequency appears in the Selected
Frequencies list.
Note – The frequencies that you program must conform to the
channel spacing and minimum tuning requirements for the
radio. To view this information, click
Radio Info. You may select
either 12.5 or 25 kHz channel spacing. All radios in your
network must use the same channel spacing.
9. When you have configured all the frequencies you require, click
OK.
The WinFlash software updates the 5800 receiver’s radio
frequencies and then restarts the receiver.
160.1 Configuring the internal 900 MHz radio setup
Use one of the following:
• The Trimble Survey Controller software running on a Trimble
controller
• The WinFlash software (provided on the Trimble R7, Trimble R8,
5700, and 5800 GPS Receivers CD)
The internal radio has 40 available networks. You must choose the
same network that is configured in the base radio you want to receive
from.
Configuring the radio network using the Trimble
Survey Controller software
1. Connect to the 5800 receiver with Bluetooth (or the appropriate
data cable if necessary).
2. From the main menu on the controller, select Configuration.
3. In the dialog that appears, select Survey styles, then from the
Type field, select RTK.