Filter
Top Products
5700 GPS Receiver User Guide 67
Software Utilities 6
Operation
6.2.2 Configuring the 5700 Receiver
To configure a 5700 receiver using the GPS Configurator software:
1. Connect Port 1, 2, or 3 on the receiver to a serial (COM) port on
the computer and apply power.
2. To start the GPS Configurator software, click , then
select Programs / Trimble / GPS Configurator / GPS
Configurator.
The software automatically establishes a connection with the
5700 receiver.
3. Make appropriate selections for your required receiver settings.
For more information, refer to the GPS Configurator Help.
4. Click
Apply.
The settings in the GPS Configurator software are applied to the
receiver.