Filter
Top Products
5700 GPS Receiver User Guide 149
Event Marker Input and 1PPS Output 13
Reference
5. Select the 1PPS (port 2 only) check box.
6. If you want ASCII time tags enabled, select the check box and
choose an output port.
7. Click
Apply.
The GPS Configurator software sends the new configuration
information to the 5700 receiver, and the receiver starts to
generate 1PPS output on Port 2.
8. Click
OK to exit the GPS Configurator software.
The software disconnects from the 5700 receiver.
Using an application file
The Configuration Toolbox software lets you create an application file
containing the appropriate configuration instructions for 1PPS output.
You can then transfer that file to the 5700 to enable 1PPS output.
For more information, see Configuration Toolbox Software, page 68,
or refer to the Configuration Toolbox Help.
To create an application file for 1PPS output:
1. Connect the computer to the 5700 receiver.
2. Power on the 5700 receiver.
3. To start the Configuration Toolbox software, click ,
then select Programs / Trimble / Configuration
Toolbox / Configuration Toolbox.
The main Configuration Toolbox window appears.
4. Select File / New / 5700 to display the Configuration File
dialog.
5. From the Available list, select Device, and then click
Add.
6. From the Device field, select 1 Pulse Per Second.