Filter
Top Products
5 Transferring Data
64 5700 GPS Receiver User Guide
Operation
5.5 Deleting Files in the Receiver
You can delete files stored in the 5700 receiver at any time. Do one of
the following:
• Use the Data Transfer utility in the Trimble Geomatics Office
software.
• Use the TSC1 data collector.
• Hold down
for 30 seconds after the receiver has been
powered on. When you use this method, all data is deleted.
• Use the GPS Configurator software.
5.6 Supported File Types
Table 5.1 shows the file types that you can transfer to or from a 5700
receiver and the software or utility that you must use to transfer each
file type.
Table 5.1 Supported file types
File Type Extensions Transfer from
5700 receiver?
Transfer to
5700 receiver?
Software
Ephemeris .eph Yes No Data Transfer
Raw observations .T00, .dat Yes No Data Transfer
Receiver firmware files .elf No Yes WinFLASH
Application files .cfg Yes Yes Configuration
Toolbox