Filter
Top Products
5700 GPS Receiver User Guide 87
Static and FastStatic Surveying 7
Applications
5. In the Timing group, enter a start date and time, and a duration
in hours.
6. If you want to run this session repeatedly, select the Repeat
every check box and enter the repeat interval in the hours field.
7. Click
OK to close the Scheduled survey dialog. The session
details appear in the session table.
8. Click
Apply.
The GPS Configurator software sends the session details to the
receiver as two timed application files (one file to start logging,
and the other to stop logging).
9. Click
OK to close the GPS Configurator software.
10. If you do not need to use the 5700 receiver before the scheduled
survey, press
.
The receiver goes into Sleep mode, indicated by the yellow
Logging/Memory LED flashing every three seconds. The
receiver wakes up again five minutes before the scheduled start
time.