Filter
Top Products
5700 GPS Receiver User Guide 37
General Operation 3
Operation
3.2 Button Functions
The 5700 receiver has only two buttons: a Power button, represented
in this manual by
, and a Data button, represented by .
Use
to switch the receiver on or off, and to perform data
management functions such as deleting files or resetting the receiver.
Use
to start or stop logging. This button is only effective when the
receiver is switched on and has completed any power-up and
initialization tasks.
Table 3.1 describes the main functions of the two buttons.
Note – The term “press” indicates that you should press the button
down and release it immediately. The term “hold” indicates that you
should press the button down and hold it down until the time indicated
has elapsed.
Table 3.1 Button functions
Action Power button Data button
Turn the receiver on Press
Turn the receiver off Hold for 2 seconds
Start logging data internally Press
Stop logging data internally Hold for 2 seconds
Delete the ephemeris file Hold for 15 seconds
Reset the receiver to factory defaults Hold for 15 seconds
Delete application files Hold for 30 seconds
Format the CompactFlash card Hold for 30 seconds