Filter
Top Products
5700 GPS Receiver User Guide 61
Transferring Data 5
Operation
5.3 Transferring Data
Transfer the data files to the computer using the Trimble Data Transfer
utility. You can run this utility as a standalone program or from within
the Trimble Geomatics Office software. For more information about
the transfer process, refer to the Data Transfer Help.
Note – When you connect to a 5700 receiver in the Data Transfer
utility, you must use a GPS Receiver (5000 Series) device definition. If
you use a GPS Receiver (4000 Series) device definition, the Data
Transfer utility will be unable to establish communication with the
5700 receiver.
When transfer is complete, the Data Transfer utility automatically
converts the file to the DAT format. If you are using Data Transfer
from within the Trimble Geomatics Office software, the Check-in
dialog appears. For more information, refer to the Trimble Geomatics
Office User Guide.
Note – A file in DAT format is approximately six times the size of the
corresponding file in the 5700 receiver’s internal format. Before
transferring files, make sure that there is enough space on your
computer.