Filter
Top Products
5700 GPS Receiver User Guide 85
Static and FastStatic Surveying 7
Applications
3. Do one of the following:
– If the Trimble Survey Controller software is being used to
start the survey, follow the guidelines in the Trimble Survey
Controller Reference Manual.
–Press
on the 5700 receiver and wait until the red SV
Tracking LED starts flashing slowly.
4. On the 5700 receiver, press
.
5. Logging begins, and the Logging/Memory LED lights up.
6. In a FastStatic survey, the Logging/Memory LED starts flashing
slowly when enough data has been collected.
7. When you have collected enough data for your application, hold
down
for 2 seconds to stop logging.
8. Hold down
for 2 seconds to turn the receiver off.