Filter
Top Products
3 General Operation
44 5700 GPS Receiver User Guide
Operation
If there is no external power supplied and both internal batteries are
drained, none of the data that you have logged is lost. When internal or
external power is restored, the receiver restarts in the same state as
when power was lost. For example, if the receiver was logging data,
the data file is not corrupted, and when power is restored the receiver
resumes logging with the same settings as before.
The power supply that is supplied with the 5700 receiver charges the
receiver’s internal batteries while they are still in the receiver. To do
this, connect the power supply (Part Number 30413) to the data/power
cable (Part Number 32345), connect the cable to Port 2 on the
receiver, and connect the power supply to an AC power source.
Figure 3.2 Charging the batteries
2
3
t
data/power cable
to AC
power supply