Filter
Top Products
5700 GPS Receiver User Guide 119
Cables and Connectors 11
Reference
Figure 11.2 gives pinout requirements for the connector labeled
Port 1. The pin locations for the Port 2 and Port 3 connectors are
identical.
Figure 11.2 Pinout connector diagram
Table 11.1 describes the pinout functionality.
Table 11.1 5700 port pinouts
Pin Pinout function
Port 1 (TSC1 data
collector, event, or
computer)
Port 2 (Power in,
computer, PPS, or event)
Port 3 (External radio or
power in)
1 Signal GND Signal GND Signal GND
2 GND GND GND
3 TX data out (TXD1) TX data out (TXD2) TX data out (TXD3)
4 RTS1 1PPS RTS3
5 CTS1/Event 2 Event 1 CTS3
6 Power Out (+) Power In (+) Power In/Out (+)
7 Serialdatain(RXD1) Serialdatain(RXD2) Serialdatain(RXD3)
7
1
3
6
4
2
5