Filter
Top Products
3 General Operation
46 5700 GPS Receiver User Guide
Operation
3.8.1 Operation with the TSC1 Data Collector
If the 5700 receiver is being powered by its internal batteries, it does
not supply power to the TSC1 data collector when they are connected.
However, the TSC1 batteries and the 5700 receiver batteries can be
charged at the same time from the same power supply. To charge both
sets of batteries, use two standard data/power cables (Part Number
32345) to connect the TSC1 data collector and the 5700 receiver to a
power supply, as shown in Figure 3.4.
Figure 3.4 Charging receiver and TSC1 batteries
2
3
t
to AC
data/power cables
power supply