Trimble Outdoors 5700 GPS Receiver User Manual


 
Index
5700 GPS Receiver User Guide 161
environmental factors
influence on measurement quality 98
when setting up the receiver 14
ephemeris file 64
deleting 37
eRTK Range Pole antenna. See RPA
eRTK. See extended RTK
event marker input 5, 142–145
configuring in real time 142
configuring with an application
file 144
Event Marker LED. See Radio LED
event marker/1PPS cable 121
pinouts 122
examples, of default behavior 113
extended RTK 5, 99
external power 47
minimum required to charge internal
batteries 45
F
factory defaults 109–116
resetting to 37, 112
FastStatic surveying 82
setup 84
specifications 107
starting automatically 86
using a TSCI handheld 83
features
1PPS output 5
automatic OTF (on-the-fly)
initialization 5
centimeter accuracy 5
charging batteries internally 5
CMR input and output 5
CompactFlash card 5
extended RTK 5
OTF data 5
real-time positioning 5
RS-232 ports 5
RTCM SC-104 input and output 5
RTK data 5
submeter accuracy 5
USB port 5
WAAS capability 5
file size 61
File Storage record, in application file 51
file types
.cfg 64
.dat 62
.elf 64
.eph 64
.T00 62
application (.cfg) 64
DAT 61
data (.dat) 62
data files 62
ephemeris (.eph) 64
job 42
raw observations (.T00) 64
receiver firmware (.elf) 64
supported 64
files
deleting 64
transferring from CompactFlash
card 62
firmware 38, 39
downloading upgrade from
Internet 72
upgrading 47, 72
firmware (.elf) files 64
flashing LED 38
flow control 108
default setting 111
disabling on cellular modem 30, 155
formatting a CompactFlash card 34, 37, 43
frequencies, for internal radio 74
front panel 9