Trimble Outdoors 5700 GPS Receiver User Manual


 
9 Specifications
108 5700 GPS Receiver User Guide
Reference
9.4 Technical Specifications
Table 9.3 lists technical specifications for the 5700 receiver.
Table 9.3 Technical specifications
Feature Specification
Tracking 24 channels L1 C/A code, L1/L2 full cycle carrier
Fully operational during P-code encryption
WAAS satellite tracking
Signal processing Maxwell architecture
Very low-noise C/A code processing
Multipath suppression
Start-up Cold start: < 60 seconds from power on
Warm start: < 30 seconds with recent ephemeris
Initialization Automatic while moving or static
Minimum
initialization time
10 sec + 0.5 × baseline length (km)
Communications Three RS-232 serial ports (Port 1, Port 2, and Port 3)
Baud rates up to 115,200 bps
RTS/CTS flow control negotiation supported on Port 3
only
One USB port (download only)
Configuration Via user-definable application files or the GPS
Configurator software
Output formats NMEA-0183: GGA; GST; GSV; PTNL,GGK;
PTNL,GGK_SYNC; PTNL,PJK; PTNL,PJT;
PTNL,VGK; VHD; VTG; ZDA
GSOF (Trimble Binary Streamed Output)
1PPS
RT17