Filter
Top Products
2 SettinguptheReceiver
12 5700 GPS Receiver User Guide
Operation
Each port on the top panel is marked with an icon to indicate its main
function.
The power/data ports are all 0-shell Lemo connectors. Both Port 2 and
Port 3 can accept external power. For more information on default port
settings, see Default Settings, page 111. For more information on
connector pinouts, see Cables and Connectors, page 117.
The TNC port connectors are for GPS and radio antenna input. They
are color-coded for easy system setup. Connect the yellow GPS
antenna cable to the yellow TNC port marked ANT, and connect the
blue Range Pole antenna (RPA) cable to the blue TNC connector
marked RADIO. For more information on connecting the 5700
system, see the following sections in this chapter.
Table 2.1 5700 receiver ports
Icon Name Connections
Port 1 TSC1 data collector, event marker, or computer
Port 2 Power in, computer, 1PPS, or event marker
Port 3 External radio, power in
ANT GPS antenna
RADIO Radio communications antenna