Filter
Top Products
5700 GPS Receiver User Guide 23
SettinguptheReceiver 2
Operation
2. Insert the TSC1 data collector into the handheld bracket.
3. Connect one end of the 2 ft 0-shell to 0-shell Lemo cable (Part
Number 31288-01) to the TSC1 data collector.
4. Connect the other end of the Lemo cable to Port 1 on the 5700
receiver.
5. Place the hand grip below the handheld bracket (or above it,
depending on the position of the bracket), with the cables
running through the groove in the grip.
6. Secure any loose cables, using the velcro cable ties.