Toshiba LF516 Automobile Parts User Manual


 
88
6 F 8 A 0 9 3 4
You can check or change the preset count as described below.
The following is an example to change the preset count value from 500 (count) to 1000 (count).
Switch operation
Display example
Description
Select "PRST VAL" from the setting item
selection menu.
The currently set value (500 in this
example) appears.
Then push .
The switches at the bottom change.
( are shown.)
At the same time, the cursor appears.
Push to move the cursor to the
digit you want to change and push
to change the number of the digit.
When you push , a message appears
to confirm whether the setting is OK or not.
If OK, push . If you want to redo the
setting, push .
Pushing cancels the setting operation
and exits the setting screen.