Filter
Top Products
123
6 F 8 A 0 9 3 4
Note: When the one-shot pulse output function is selected, if its pulse width is large compared
with the update period of the preset value. The output stays ON. To make sure to output as
one-shot pulse, set the preset value reach interval to be 2 signals or more of the pulse width
setting value.
Preset Pulse
Width
The Interval of that Totalizer
reaches the Preset Point
Example) Count rate:0.01 l
Flow verosity:10 l/s
Totalizer count up rate:1ms/COUNT
50ms More than 100ms Preset Count: more than 100
500ms More than 1000ms Preset Count: more than 1000