Filter
Top Products
Chapter 3: Standard Chart Operations 3-35
Transferring
Waypoints and
Routes
➤ To save waypoints to, or load waypoints from a user cartridge:
CAUTION:
Loading waypoints from a user cartridge overwrites any existing
waypoint and route lists.
1. Insert a C-MAP User Card into the lower of the two cartridge slots.
1. Press MARK S followed by the LOAD/SAVE USER CARD soft key.
2. The User Card Menu and associated soft keys are displayed.
3. Press the SAVE WPT/RTE DATA TO CARD or LOAD WPT/RTE DATA FROM
CARD soft key; an appropriate warningand Yes/No softkeys are displayed.
4. Press Yes to continue or No to abandon the operation and return to the pre-
vious screen.
5. If the operation is successful, confirmation of the number of Routes and
Waypoints saved/loaded is displayed.
If the operation fails, the Save Failed message is displayed.
MARKS
USER CARD PRESENT
WARNING
SAVING DATA TO THE USER
CARD WILL ERASE ALL EXISTING
WAYPOINT AND ROUTE DATA
ON THE CARD.
USER CARD MENU
ARE YOU SURE ?
YES NO
USER CARD PRESENT
SAVE COMPLETE
SAVED 2 ROUTE(S) AND
7 WAYPOINT(S)
USER CARD MENU
LOAD WPT/
RTE DATA
FROM CARD
SAVE WPT/
RTE DATA
TO CARD
CHECK
CARD IN
USER SLOT