Raymarine 631 PLUS GPS Receiver User Manual


 
Chapter 2: Getting Started & Adjusting the Display 2-7
Selecting the Mode of
Operation
Selecting a Half-Screen Window for Display
Note: Windows can only be used with the Chart screen,they are not available
on the data log screen.
To select a window for display:
1. Press the DISPLAY key. Thefollowing soft are displayed with animage of
each available window:
2. To select a different window, press either SELECT WINDOWS soft key until
the required window is highlighted. If necessary, this will toggle windows
on. Press ENTER.
3. To toggle windows off, press the WINDOWS OFF ON soft key.
Figure 2-3 shows the half-screen horizontal windows.
Returning to the Full-Screen Display
To return to the full-screen display you can turn windows off, as previously
described. Alternatively, to return to full-screen display:
Press and hold the DISPLAY key for 2 seconds to return to the currently
selected full-screen (upper window) display.
DISPLAY
D4156-2
SELECT
WINDOWS
WINDOWS
OFF ON
DISPLAY