Raymarine 631 PLUS GPS Receiver User Manual


 
Chapter 2: Getting Started & Adjusting the Display 2-3
Simulator Mode
To switch the display unit off, press and hold the POWER key for three
seconds. A countdown timer is displayed as shown below:
Figure 2-2: Switch Off
When the counter reaches zero a beep sounds, and the display unit switches
off. Release the POWER key.
Note: Switch the display unit off before you remove the power cord.
Simulator Mode
When simulator mode is on a simulator data box is displayed.
When thedisplay isswitched off thenon again, simulatormode ismaintained.
It is recommended that you select the System Set Up Menu and switch off
simulator mode when you have finished.
To view a simulated image:
1. Press MENU followed by the SYSTEM SET UP soft key.
The set up menu pop-up is displayed.
2. Usethe trackpadto movethe selection barover theoptionSIMULATOR.The
simulator soft keys are displayed.
3. In the system set up menu, press DATA to view the chart display with simu-
lated position.
4. Press ENTER twice to return to the default display.
Note: Any waypoints placed on the chartplotter in simulator mode are re-
tained in the database list and are available for use in routes.
DISPLAY
GAIN
VRM/EBL
MULTI
MARKS
ALARMS
RANGE
ENTER CLEAR MENU
POWER
Countdown timer:
number of seconds
to power off
SECONDS
3
D3599-1
POWER OFF IN
3s
MENU
SYSTEM
SET UP¬