Filter
Top Products
User’s manual NAVIGON 92 Plus | 92 Premium
- 88 - Handsfree Module
► If the new device is a mobile phone, one of the two symbols will
appear to the right of its name in green colour depending on
whether it is connected as Phone 1 or as Phone 2.
10.1.2 Pairing from the mobile phone
Note: Please consult the mobile phone's manual if you are uncertain
about how to carry out the following steps on the mobile phone.
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the navigation device. To perform the pairing
from the mobile phone, the functions Discoverable by Others and
Others May Connect must also be activated on the navigation
device (see "Configuring the hands-free function" on page 98).
2. Using your mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON.
3. Initiate a connection to the detected NAVIGON device.
The mobile phone prompts you to enter a password.
4. Enter a password (1-16 digits).
The navigation device prompts you to enter a password.
5. Enter the same password in the Key box as on the mobile phone
and tap on OK.
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the T
RUSTED
DEVICES list.
► If the new device is a headset, the symbol will appear to the
right of its name in green colour. The connection to any mobile
phones will be disconnected if applicable.
► If the new device is a mobile phone, one of the two symbols will
appear to the right of its name in green colour depending on
whether it is connected as Phone 1 or as Phone 2.
10.1.3 Connecting to a device
In this case "connection" refers to any subsequent connections between
Bluetooth devices which have already been paired. No further password
entry is necessary when connecting.
1. Make sure that Bluetooth is activated on your navigation device.
(See "Configuring the hands-free function" on page 98)
► If you want to set up a connection to a mobile phone, make sure
that Bluetooth is activated on the mobile phone and that the Others
May Connect setting is activated.