Filter
Top Products
User’s manual NAVIGON 92 Plus | 92 Premium
- 50 - Navigation
Route Profile
The route is calculated on the basis of a route profile. The current route
profile is indicated at the top right edge of the map on the (Route
Profile) button.
Route profiles take account of the characteristics and special aspects of
the different modes of transport. For example a route profile for bicycles
will exclude motorways from the route calculation but will include roads
which other vehicles are not allowed to use. And a bicycle profile will
calculate different arrival times than a motorcycle profile.
Note: If you select a pedestrian profile, a type of navigation specially
developed for pedestrians will be started (see "Navigation in Pedestrian
mode" on page 59).
► Tap on the (Route Profile) button if you want to select a
different route profile.
For details of how to create and select route profiles refer to chapter
"Route Profiles" on page 65.
Note: When you load routes which originate from a different provider
than NAVIGON, it may be impossible for you to change the route profile
of this route.
MyRoutes
When the MyRoutes function is activated, the navigation system
calculates up to three routes on the basis of the currently selected route
profile and shows them on the map in different colours (orange, green,
blue) and with a number. For each route there is a button with the same
number and a symbol in the same colour.
When calculating the time of arrival or the trip time, the navigation
system takes account of additional factors such as day of the week,
time of day and particularly your previous driving profile.
The route which corresponds best to the selected route profile is
marked with "MyRoute".
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for
the selected destination. No further suggestion is then shown on the
button in question.
Activate MyRoutes
You can specify whether you want several routes to be available for
selection before the navigation starts.