Pioneer AVIC-Z130BT GPS Receiver User Manual


 
1 2 3 4
1 Stores the strongest broadcast frequen-
cies
2 Switches the seek mode
3 Tunes in strong signals
4 Switches the reception mode
= For detailsof eachfunction, refer to sec-
tions below with the relative titles.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under the preset tuning keys Preset
1to Preset 6 and, once stored there, you
can tune in to these frequencies with the
touch of a key.
1 Touch
on the Tunerscreen.
2 Touch [BSM].
3 Touch [Start] to begin a search.
BSMbegins to flash. While BSMis flash-
ing, the six strongest broadcast frequencies
will be stored under the preset tuning keys
Preset 1 to Preset 6 in order of their signal
strength. When this is complete, BSM stops
flashing.
p To cancel the storage process, touch
[Stop].
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
Switching the seek mode
You can select the method of seek tuning.
1 Touch
on the Tunerscreen.
2 Touch [Seek] to select the desired set-
ting.
! All:
Seeks stations from both analog and digital
broadcasting.
! HD:
Seeks from digital broadcasting only.
p If you select HD onthis settingwhile
[Blending] is set to Analog, the setting
on [Blending] turns to D/A Autoautoma-
tically.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Touch
on the Tunerscreen.
2 Touch [Local].
3 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [Off].
4 Touch [cPrev] or [Nextd] to set the sen-
sitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1 2 3 4
AM: 1 2
p The FM 4(AM 2) setting allowsrecep-
tion of only the strongest stations, while
lower settings let you receive weaker sta-
tions.
Switching the reception mode
If a digital broadcast reception condition gets
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
by default. If you want to prevent a frequent
automatic switching, switch this setting to
[Analog].
1 Touch
on the Tunerscreen.
En
85
Chapter
16
HD Radio
reception
HD Radio
reception