Pioneer AVIC-Z130BT GPS Receiver User Manual


 
8 Touch the Bluetooth device name you
want to register.
# If you touch [Search Again], the system starts
searching for Bluetooth devices waiting for con-
nection, and displays them in the list format
when any devices are detected.
9 Enter the password (the default pass-
word is 1111) using the Bluetooth de-
vice.
Enter the password while the message Please
follow the instructions on your mobile
phone.appears.
The device is registered in the navigation sys-
tem.
After the device is successfully registered, the
Bluetooth connection is established from the
navigation system.
Deleting a registered device
When you have already registered 5 Bluetooth
devices and you want to add another one, you
must first delete one of the registered devices.
p If a registered phone is deleted, all the
phone book entries and call history lists
that correspond to the phone will be also
cleared.
1 Display the Settings Menu screen.
= For detailsof the operations, refer to Screen
switching overview on page 22.
2 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
3 Touch [Registration].
A message prompting you to delete a regis-
tered device appears.
4 Touch [OK].
The Delete from Connection List screen
appears.
5 Touch the Bluetooth device name that
you want to delete.
The device is deleted.
Connecting a registered
Bluetooth device manually
The navigation system automatically connects
the Bluetooth device selected as the target of
connection. However, connect the Bluetooth
device manually in the following cases:
! Two or more Bluetooth devices are regis-
tered, and you want to manually select the
device to be used.
! You want to reconnect a disconnected
Bluetooth device.
En
59
Chapter
11
Registering and connecting a Bluetooth device
Registering and connecting a Bluetooth device