Filter
Top Products
If data related to map data, such as custo-
mized POI data, is stored on the SD memory
card, operating procedures are slightly differ-
ent.
1 Press the h button and then touch
[Eject SD].
2 Touch [Yes].
The navigation system restarts, and then the
LCD panel opens.
3 Eject the SD memory card.
4 Press the h button.
The LCD panel closes.
Inserting an SD memory card (for
AVIC-X930BT and AV IC-X9310BT)
% Insert an SD memory card into the SD
card slot.
Insert the SD memory card with the terminal
contacts facing down, and press the card until
it clicks and locks completely.
p If data related to map data, such ascusto-
mized POI data, is stored on the SD mem-
ory card,the navigationsystem restarts.
Ejecting an SD memory card (for
AVIC-X930BT and AV IC-X9310BT)
1 Press the h button.
The touch panel keys for ejecting the media
appear.
2 Touch [Eject SD].
A message prompting you to remove the SD
memory card appears.
3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
When the data related to map data is
stored
p This description is for AVIC-X930BTand
AVIC-X9310BT.
En
18
Chapter
02
Basic operation