Pioneer AVIC-Z130BT GPS Receiver User Manual


 
1 Select a frequency that you want to
store in memory.
2 Display the preset channel list.
= For details,refer toSwitches between the
AV operation screen and the preset list
display on the previous page.
3 Keep touching a preset tuning key [P1]
to [P6].
Presetlist display
Presettuning keys
= For detailsof the list operations, refer to Op-
erating list screens (e.g. iPod list screen) on
page 70.
The selected radio station has been stored in
memory.
The next time you tap the same preset tuning
key P1 to P6, the radio station frequencies
are recalled from memory.
p Up to 18 FM stations, six for each of the
three FM bands can be stored in mem-
ory.
Operating by hardware
buttons
Pressing the TRK button
You can move preset channels up or down.
Pressing and holding the TRK button
You can perform seek tuning.
Using advanced functions
% Touch on the FMscreen.
The Function menu appears.
1 2
1 Stores the strongest broadcast frequen-
cies
2 Tunes in strong signals
= For detailsof eachfunction, refer to sec-
tions below with the relative titles.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under the preset tuning keys P1to
P6and, once stored there, you can tune into
them with the touch of a key.
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.
1 Touch
on the FMscreen.
The Function menu appears.
2 Touch [BSM].
3 Touch [Start] to begin a search.
BSMbegins to flash. While BSMis flash-
ing, the six strongest broadcast frequencies
will be stored under the preset tuning keys
P1to P6 in order of their signal strength.
When this is complete, BSM stops flashing.
# If you touch [Stop], the storage processis
canceled.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
En
74
Chapter
14
Using the radio (FM)