Pioneer AVIC-Z130BT GPS Receiver User Manual


 
You can control the Bluetooth audio player.
p Before using the Bluetooth audio player,
you need to register and connect the device
to this navigation system.
= For details, refer to Registering your
Bluetooth devices on page 56.
p Operations may vary depending on the
kind of a Bluetooth audio player.
p Depending on the Bluetooth audio player
connected to this navigation system, the
available operations with this navigation
system are limited to the following two le-
vels:
! A2DP profile (Advanced Audio Distribu-
tion Profile): Only playing back songs on
your audio player is possible.
! A2DP profile and AVRCP profile (Audio/
Video Remote Control Profile): Playing
back, pausing, selecting songs, etc., are
possible.
p Since there are a number of Bluetooth
audio players available on the market, op-
erations with your Bluetooth audio player
using this navigation system vary greatly in
range. Please refer to the instruction man-
ual that came with your Bluetooth audio
player as well as this manual while operat-
ing your player on this navigation system.
p While you are listening to songs on your
Bluetooth audio player, please refrain from
operating your cellular phone as much as
possible. If you try operating on your cellu-
lar phone, the signal from your cellular
phone may cause a noise on the song play-
back.
p Even if you switch to another source while
listening to a song on your Bluetooth audio
player, the playback of song continues to
elapse.
p Depending on the Bluetooth audio player
you connected to this navigation system,
operations on this navigation system to
control the player may differ from those ex-
plained in this manual.
p When you are talking on a cellular phone
connected to this unit via Bluetooth wire-
less technology, song playback from your
Bluetooth audio player connected to this
unit may be paused.
Starting procedure
1 Display the AV operation screen.
= For detailsof the operations, refer to Dis-
playing the AVoperation screen on page70.
2 Tap [Audio] on the left edge of the
screen to display the Audioscreen.
3 Use the touch panel keys on the screen
to control the Bluetooth audio player.
= For details,refer toUsing the touch panel
keys on page 133.
Reading the screen
4
56
312
1 Playback condition indicator
Indicates the current playback condition if the
connected Bluetooth audio player features
AVRCP 1.3.
Playing files in random order
Indicator Meaning
Does not playfiles in random
order.
Plays all audiofiles in the cur-
rent repeat playrange in ran-
dom order.
En
131
Chapter
27
Using the Bluetooth audio player
Using the Bluetooth audio player