Pioneer AVIC-Z130BT GPS Receiver User Manual


 
5 Wait until your Bluetooth device ap-
pears in the list.
p If you cannot find theBluetooth device that
you want to connect, check that the device
is waiting for the Bluetooth wireless tech-
nology connection.
6 Touch the Bluetooth device name you
want to register.
# If you touch [Search Again], the system starts
searching for Bluetooth devices waiting for con-
nection, and displays them in the list format
when any devices are detected.
7 Enter the password (the default pass-
word is 1111) using the Bluetooth de-
vice.
Enter the password while the message Please
follow the instructions on your mobile
phone.appears.
The device is registered in the navigation sys-
tem.
After the device is successfully registered, the
Bluetooth connection is established from the
navigation system.
Pairing from your Bluetooth
devices
You can register the Bluetooth device by set-
ting the navigation system to standby mode
and requesting connection from the Bluetooth
device.
1 Activate the Bluetooth wireless tech-
nology on your devices.
For some Bluetooth devices, no specific-action
is necessary to activate Bluetooth wireless
technology. For details, refer to the instruction
manual of your devices.
2 Display the Settings Menu screen.
= For detailsof the operations, refer to Screen
switching overview on page 22.
3 Touch [Bluetooth Settings].
The Bluetooth Settingsscreen appears.
4 Touch [Registration].
The Nearby Device Listscreen appears.
5 Touch [Register from mobile phone].
The navigation system waits for a Bluetooth
wireless technology connection.
En
57
Chapter
11
Registering and connecting a Bluetooth device
Registering and connecting a Bluetooth device