Pioneer AVIC-Z130BT GPS Receiver User Manual


 
If data related to map data, such as custo-
mized POI data, is stored on the SD memory
card, operating procedures are slightly differ-
ent.
1 Press the h button and then touch
[Eject SD].
2 Touch [Yes].
The navigation system restarts, and a message
prompting you to remove the SD memory card
appears.
3 Eject the SD memory card while the
message is displayed.
Eject the SD memory card before touching
[OK].
4 Touch [OK].
The navigation system restarts.
Plugging and unplugging a
USB storage device
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on thesto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Plugging in a USB storage device
% Plug a USB storage device into the USB
and mini-jack connector.
USB and mini-jackconnector
USB storage device
p Compatibility with all USB storage devices
is not guaranteed.
This navigation system may not achieve op-
timum performance with someUSB sto-
rage devices.
p Connection via a USB hub is not possible.
Unplugging a USB storage device
% Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on thesto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
En
19
Chapter
02
Basic operation
Basic operation