Filter
Top Products
1 Press the h button.
The “Monitor Setup” screen appears.
2 Touch [SD Insert].
The LCD panel opens, and the SD card slot ap-
pears.
3 Insert an SD memory card into the SD
card slot.
Insert it with the label surface facing to the up-
side and press the card until it clicks and com-
pletely locks.
4 Press the h button.
The LCD panel closes.
p If data related to map data, such ascusto-
mized POI data, is stored on the SD mem-
ory card,the navigationsystem restarts.
Ejecting an SD memory card
(for AVIC-Z130BT)
1 Press the h button.
The “Monitor Setup” screen appears.
2 Touch [Eject SD].
The LCD panel opens.
3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
5 Press the h button.
The LCD panel closes.
p When you eject the SD memory card by
touching [Eject SD], the model information
that you are using will be automatically
stored into the SD memory card.
The utility program AVIC FEEDS will use
this information to recognize the model
that you use.
When the data related to map data is
stored
p This description is for AVIC-Z130BT.
En
17
Chapter
02
Basic operation
Basic operation