Pioneer AVIC-Z130BT GPS Receiver User Manual


 
4 Memorizes the current song
= For details, refer to Memorizing the song
on the next page.
5 Recalls channels from the preset
Tap to recall the preset channel.
= For details, refer to Storing and recalling
broadcast stations on this page.
6 Switches the SIRIUS display
Each touch of [Disp] changes the display in-
formation.
Channel number Channel name Chan-
nel category Artist name/feature Song/
program title Composer
7 Recalls equalizer curves
= For details, refer to Using the equalizer
on page 175.
8 Displays the Functionmenu
= For details, refer to Using advanced func-
tions on page 145.
9 Switches the SIRIUS channel select
mode
You can switch the mode between the two
methods for selecting and listing the channel.
All CH Mode:
You can select a channel fromall channels
when you operate this function.
Category Mode:
You can select a channel withina selected ca-
tegory thatyou operatethis function.
a Switches between the AV operation
screen and the preset list display
You can switch the screen display according
to your preference.
= For details of the operation, refer to
Switching between the AV operation
screen and the list screen on page 70.
b Selects a SIRIUS band
Tapping the key repeatedly switches between
the following SIRIUS bands: SIRIUS1,
SIRIUS2,orSIRIUS3.
p This function is convenient for preparing
different preset lists for each band.
c Switches the channel category
Touch [c]or[d] to select the desired cate-
gory.
Selecting a SIRIUS channel directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1 Touch [Direct].
2 Touch [0] to [9] to input the desired
channel number.
To cancel the input numbers one by one,
touch
. Touching and holding allows you
to delete all input numbers.
3 While the input number is displayed,
touch [Enter].
The SIRIUS channel that was entered se-
lected.
4 Touch
.
You return to the previous display.
Display the Radio ID
If you select CH: 000, the Radio ID is dis-
played.
1 Touch [Direct].
2 Input [000] and then touch [Enter].
If you select another channel, display of the
Radio ID is canceled.
3 Touch
.
You return to the previous display.
4 Wait until the Radio ID is displayed.
Storing and recalling broadcast
stations
With a tap of any of the preset tuning keys
(Preset1to Preset6), you can easily store
up to six broadcast stations for later recall
(also with the tap of a key).
1 Select the channel that you want to
store in memory.
2 Display the preset channel list.
= For details,refer toSwitches between the
AV operation screen and the preset list
display on this page.
En
143
Chapter
29
Using the SIRIUS tuner
Using the SIRIUS tuner