Filter
Top Products
# The test tone rotatesto the next speaker after
about two secondsfrom the last operation.
4 Touch STOP to stop the test tone out-
put.
Notes
! If needed, selectspeakers and adjusttheir ‘ab-
solute’ output levels. (Refer to Adjusting the
speaker output levels on theprevious page.)
! You can store the adjustedsetting in memory
by using MEMORY. For detailsconcerning op-
eration, refer toStoring the adjusted audio set-
tings in memory on this page.
! The adjusted speakeroutput level cannot be
stored by each listeningposition. This means,
memorizing a speakeroutput level for custom
setting overwrites the levels ofall listening po-
sitions.
Adjusting the speaker output
levels finely
You can readjust the speaker output levels
using a test tone while listening to music.
1 Recall the speaker output level settings
you want to adjust.
Refer to Recalling the speaker output level set-
tings on the previous page.
2 Touch ADJ. next to SPEAKER LEVEL.
3 Touch
or to adjust the speaker out-
put level.
Each time you touch
or it increases or de-
creases the speaker output level. –24dB to
+10dB is displayed as the level is increased or
decreased.
# You cannot select speakerswhose size is set
at OFF.
Notes
! You can store the adjustedsetting in memory
by using MEMORY. For detailsconcerning op-
eration, refer toStoring the adjusted audio set-
tings in memory on this page.
! The adjusted speakeroutput level cannot be
stored by each listeningposition. This means,
memorizing a speakeroutput level for custom
setting overwrites the levels ofall listening
positions.
Using the auto-equalizer
You can use this function only when
STANDARD has been selected. (Refer to
Switching the DSP setting mode on page 104.)
The auto-equalizer is the equalizer curve cre-
ated by auto TA and EQ (refer to Auto TA and
EQ (auto-time alignment and auto-equalizing)
on the next page).
You can turn the auto-equalizer on or off.
1 Touch AUTO EQ on the sound setting
menu.
# You cannot use thisfunction if auto TA and
EQ has not beencarried out.
2 Touch ON to turn the auto-equalizer
on.
# To turnauto-equalizer off, touch OFF.
Storing the adjusted audio
settings in memory
You can store the adjusted audio settings in
this unit for later recall.
1 Touch MEMORY.
2 Touch any of CUSTOM1, CUSTOM2 or
CUSTOM3 to store the adjusted setting.
Audio Adjustments
En
91
Section
17
Audio Adjustments