Filter
Top Products
% Touch DVD DISC AUTO on the initial
menu to turn automatic disc playback on.
# To turnautomatic disc playback off, touch
DVD DISC AUTO again.
Resetting the audio functions
You can reset all audio functions except vo-
lume.
Important
If you perform this operation, audio settings are
erased. For this reason, we recommend that you
record the settings inthe sheet on page 121after
you have completedaudio adjustments.
1 Touch AUDIO RESET on the initial
menu.
2 Touch RESET.
Proceed with reset? appears and asks you to
confirm it.
3 Touch RESET again to reset audio func-
tions.
Reset completed is displayed and the audio
settings are reset.
# To cancelresetting the audio functions, touch
CANCEL.
Switching the DSP setting
mode
This unit features two operation modes: the
network mode and the standard mode. You
can switch between modes as desired. Initi-
ally, the DSP setting is set to the standard
mode.
! Switching the DSP mode erases the cur-
rent adjusting audio settings
(LAST MEMORY). If needed, memorize it
into custom settings (CUSTOM1,
CUSTOM2 or CUSTOM3).
1 Touch DSP MODE on the initial menu.
2 Touch either of the following touch
panel keys to select the desired mode.
! STANDARD – Standardmode
! NETWORK – Networkmode
3 Touch CHANGE to change the mode.
# To cancelchanging the mode, touch
CANCEL.
Setting the optical input
When connecting a DVD player, select S-DVD.
% Touch OPTICAL INPUT on the initial
menu to select the optical input setting.
Touch OPTICAL INPUT until the desired set-
ting appears in the display.
! OFF – No DVDplayer is connected
! S-DVD – DVD player/multi-DVD player
Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
! This function is initially set to AUTO so that
this unit automatically adjusts the TV signal
setting.
% Touch TV FORMAT on the initial menu
to select an appropriate TV signal.
Touching TV FORMAT switches TV signal set-
tings in the following order:
AUTO—PAL—NTSC—PAL-M—SECAM
Initial Settings
En
104
Section
20