Filter
Top Products
# If this unit fails tofind any available cellular
phones, Not Foundis displayed.
3 Touch the device name you want to
connect.
While connecting, CONNECTING flashes. To
complete the connection, please check the de-
vice name (Pioneer BTunit) and enter the link
code on your cellular phone. If the connection
is established, CONNECTED is displayed.
# The link code isset to 0000 as default. You
can change this codein the initial setting. Refer
to Entering PIN codefor Bluetooth wireless con-
nection on page 105.
Using a cellular phone to
initiate a connection
1 Touch PHONE CONNECT on the function
menu.
2 Touch CONNECTION OPEN.
The unit is now on standby for connection
from cellular phone.
3 Use cellular phone to connect to this
unit.
# To cancelthis function, touch
CONNECTION OPEN again.
# The link code isset to 0000 as default. You
can change this codein the initial setting. Refer
to Entering PIN codefor Bluetooth wireless con-
nection on page 105.
Disconnecting a cellular phone
1 Touch PHONE CONNECT on the function
menu.
2 Touch DISCONNECT to disconnect the
currently connected cellular phone from
this unit.
After the disconnection is completed,
No Connection is displayed.
Registering connected
cellular phone
1 Touch PHONE REGISTER on the function
menu.
Registration assignments appear on the dis-
play. From the top to the third assignment are
for User phone 1, 2 and 3. The rest two assign-
ments are for Guest phone 1 and 2.
2 Touch and hold one of the registration
assignments to register the currenctly con-
nected phone.
If the registration is succeeded, the device
name of the connected phone is displayed in
the selected assignment.
# If the assignment is empty, thedevice name is
not displayed. If theassignment is already taken,
the device name appears.To replace anassign-
ment with a newphone, first delete the current
assignment. For more detailed instructions,see
Deleting a registered phone on thispage.
# If the registration failed,device name of the
connected phone is notdisplayed in the selected
assignment. In this case,return to step 1 and try
again.
Deleting a registered phone
1 Touch PHONE REGISTER on the function
menu.
Bluetooth Telephone
En
63
Section
14
Bluetooth Telephone