Filter
Top Products
! Incoming call notice is not displayed for
calls made when your cellular phone is
disconnected from this unit.
a Voice recognition indicator
Shows when the voice recognition function
is on (for more details, refer to Voice recogni-
tion on this page).
b Presetdial list display
Shows the Preset dial list.
% Touch the source icon and then touch
Telephone to select the telephone.
Note
Equalizer curve for the phone sourceis fixed.
When selecting the phonesource, you cannot op-
erate the equalizer function. Refer to Recalling
equalizer curves on page 84.
Setting up for hands-free
phoning
Before you can use the hands-free phoning
function you will need to set up the unit for
use with your cellular phone. This entails es-
tablishing a Bluetooth wireless connection be-
tween this unit and your phone, registering
your phone with this unit, and adjusting the
volume level.
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting a cellular phone on
the next page.
# Your phone should nowbe temporarily con-
nected; however, to make best useof the technol-
ogy, we recommend you registerthe phone to
this unit.
2 Registration
Refer to Registering connected cellular phone
on page 63 for instru ctions on how to register
your temporarily connected phone.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
setting.
# Caller’s voice volume andring volume may
vary depending on the type ofcellular phones.
# If the difference betweenthe ring volume and
caller’s voice volume isbig, overall volume level
may become unstable.
# Before disconnecting cellularphone from this
unit, make sure toadjust the volume to proper
level. If the volumehas been muted (zero level)
on your cellular phone,the volume level of your
cellular phone remains mutedeven after the cel-
lular phone is disconnected from this unit.
Basic operation of hands-
free phoning
Important
Advanced operations thatrequire your attention
such as dialing numberson the monitor, using
phone book, etc., areprohibited while you are
driving. When you needto use these advanced
operations, stop your vehicle ina safe place and
operate.
Making a phone call
Voice recognition
1 Touch VOICE to turn the voice recogni-
tion function on.
Voice dial icon appears on the information bar.
Voice recognition function is now ready.
Bluetooth Telephone
En
61
Section
14
Bluetooth Telephone