Pioneer AVH-P7850DVD Automobile Accessories User Manual


 
Listening to the radio
1
1
1
3
3
3
4
4
4
6
6
6
2
2
2
5
5
5
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Sourceicon
Shows which source has been selected.
2 Sourcename
Shows the selected source name.
3 Band indicator
Shows to which band the radio is tuned
when FM is selected as the source.
4 Presetnumber indicator
Shows which preset has been selected.
5 Frequencyindicator
Shows the frequency to which the tuner is
tuned.
6 Presetlist display
Shows the preset list.
1 Touch the source icon and then touch
FM or AM to select the tuner.
2 Touch BAND to select a band when FM
is selected as the source.
Touch BAND repeatedly until the desired band
is displayed, BAND 1, BAND 2 or BAND 3.
3 To perform manual tuning, briefly
touch c or d.
The frequencies move up or down step by
step.
# You can also perform manual tuningby mov-
ing the joystick left or right.
4 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seektuning by briefly touching
either c or d.
# If you keep touching cor d you can skip
stations. Seek tuning startsas soon as you re-
lease the key.
# You can also perform seek tuningby holding
the joystick left or right.
Storing and recalling
broadcast frequencies
If you touch any of the preset tuning keys
P1P6 you can easily store up to six broad-
cast frequencies for later recall with the touch
of a key.
% When you find a frequency that you
want to store in memory keep touching
one of preset tuning keys P1P6 until the
beep sounds.
The selected radio station frequency has been
stored in memory.
The next time you touch the same preset tun-
ing key the radio station frequency is recalled
from memory.
# When P1P6 are notdisplayed, you can dis-
play them by touchingLIST.
Notes
! Up to 18 FMstations, six for each of the three
FM bands, and sixAM stations can be stored
in memory.
! You can also usea and b to recall radiosta-
tion frequencies assignedto preset tuning
keys P1P6 whenP1P6 are not dis-
played.
Tuner
En
28
Section
05