Filter
Top Products
! Adjusting the time alignment
(TIME ALIGNMENT)
! Adjusting the speaker output levels
(SPEAKER LEVEL)
! Adjusting 3-band parametric equalizer
(PARAMETRIC EQ) (when selecting multi-
channel mode only)
! Adjusting 13-band graphic equalizer
(GRAPHIC EQ) (when selecting 2-channel
mode only)
Extra functions
These functions are helpful in adjusting the
sound to suit your system or your personal
preferences.
! Using balance adjustment
(FADER/BALANCE)
! Adjusting source levels
(SOURCE LEVEL ADJUSTER)
! Using the direct control (Digital Direct)
! Listening in surround sound (Dolby/DTS)
(when selecting multi-channel mode only)
! Using the dynamic range control
(DYNAMIC RANGE CONTROL)
! Using the down-mix function
(DOWN MIX)
Introduction of audio
adjustments
1
1
1
1 Audio display
Shows the audio function names.
1 Touch AV MENU to display the audio
function names.
The audio function names are displayed and
operable ones are highlighted.
# When selecting the FMtuner as the source,
you cannot switch toSOURCE LEVEL ADJUSTER.
# When selecting 2-channelmode, you cannot
switch to Dolby/DTS.
2 Touch ESC to return to the display of
each source.
# To returnto the previous display, touch
BACK.
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1 Touch FADER/BALANCE on the audio
function menu.
Audio Adjustments
En
78
Section
17