Filter
Top Products
2 Align the top of the front panel to the
unit.
3 Press the bottom of the front panel
until it is clicked.
Note
In the following cases,remove the front panel
and then attach itagain:
! When nothing appears inthe sub-display.
! When beep sounds.
Built-in DVD player basic
operations
Playing a disc
1 Press EJECT to open the front panel.
Disc loading slot appears.
# When a disc isloaded in this unit, touch the
source icon and thentouch DVD to select DVD.
2 Insert a disc into the disc loading slot.
Front panel is closed automatically, and play-
back will start.
Disc loadingslot
# When DVD DISC AUTOis off, touch the
source icon and thentouch DVD to select the
built-in DVD player(refer to page 21).
# If you are playing aDVD or Video CD, amenu
may appear. Refer to Operatingthe DVD menu on
page 32 and PBCplayback on page 37.
# When the automatic playbackfunction is on,
this unit will cancelthe DVD menu and automati-
cally start playback fromthe first chapter of the
first title. Referto Automatic playback ofDVDs on
page 35.
# You can eject adisc by pressing EJECT.
Notes
! The DVD player playsone, standard, 12-cm or
8-cm (single) disc ata time. Do not use an
adapter when playing 8-cm discs.
! Do not insert anythingother than a disc into
the disc loading slot.Discs which can be
played back are listedon Playable discs on
page 8.
! If bookmark function ison, DVD playback re-
sumes from the selectedpoint. For morede-
tails, refer to Resume playback (Bookmark) on
page 33.
! If a disc containsa mixture of various media
file types such asDivX and MP3, you can
switch between mediafile types to play. Refer
to Switching the mediafile type on the next
page.
! If you cannot insert adisc completely or if
after you insert a disc the discdoes not play,
check that the labelside of the disc is up.
Press EJECT to ejectthe disc, and check the
disc for damage beforeinserting it again.
Basic Operations
En
26
Section
04