Filter
Top Products
52
Delete All Waypoints from Waypoint List
DELETE WPTS will delete all of the waypoints in your waypoint list. If
routes currently exist, deleting waypoints requires that all routes be
deleted and a message will be displayed. See Deleting Routes.
Highlight DELETE WPTS using the UP/DOWN ARROWs and press
ENTER. You will be instructed to press ENTER to erase the waypoints.
If you change your mind, press any other function key to leave the
waypoints intact.
Clearing Receiver Memory
This reset will erase all of the waypoints in your receiver’s
memory. Before selecting Clear Menu we recommend that you
review the waypoints in your waypoint library, recording on
paper the coordinates for any waypoint that you want to use in
the future. After turning the receiver back on, you can enter
those waypoints again.
Clear Memory will erase all of your receiver’s memory including resetting
all of the Setup features to their default values.
MENU
Highlight
CLEAR MENU
Press ENTER
ENTER
Highlight
CLEAR MEMORY
Press ENTER
ENTER
Press keys as instructed by receiver
To access Clear Memory, use the UP/DOWN ARROWs to highlight
CLEAR MEMORY and press ENTER. You will then be given instructions
as to which keys to simultaneously hold down to reset your receiver.
If you change your mind, simply press any function key to escape.
Note that it is not required that you go to the SETUP menu to do
a reset; holding down the proper keys at any time will reset your
receiver.
The keys to press simultaneously are NAV, GOTO, LIGHT, and MENU.
If you do not wish to delete anything from the receier's memory, select
ESCAPE to exit the Clear Menu.
MENU
Highlight
CLEAR MENU
Press ENTER
ENTER
Highlight
DELETE WPTS
Press ENTER
ENTER
ENTER