Filter
Top Products
51
Simulator
The simulator mode causes the receiver to create a fictitious route from
your location to two newly created waypoints. You will find the Simulator
very handy when you want to review or practice using your receiver at
home. In the simulate mode you can watch the receiver simulate
movement and observe how the different navigational screens respond.
MENU
Highlight
SIMULATOR
Press ENTER
ENTER
NAV
To activate, press MENU and use the UP/DOWN ARROWs to select
SIMULATOR, then press ENTER. You will then be prompted to press
NAV to return to the NAV Screen. After using the Simulator, be sure to
turn it off again by highlighting SIMULATOR function under the MENU
key and pressing ENTER. If you turn the receiver off before you turn
the simulator off, the waypoints and route it created will not be cleared.
Deleting Last Fixes
DELETE LFIX will erase all of the waypoints in your Last Fix Buffer.
Press MENU and highlight the CLEAR MENU. Press ENTER and use
the UP/DOWN ARROWs to highlight DELETE FIXES. You will be
instructed to press ENTER to delete the Last Fixes. If you change your
mind, press any other function key to leave the last fixes as they are.
Deleting Track from the Plotter Screen
As you use your receiver more you may soon notice the PLOT screen
becoming cluttered with the graphic display of your past movement
(track). You can delete the track display with the DELETE TRACK option.
Use the UP/DOWN ARROWs to highlight DELETE TRACK and press
ENTER. You will be asked to press ENTER to confirm that you want
to delete the track history. If you change your mind, press any other
function key to leave the track as it is.
MENU
Highlight
CLEAR MENU
Press ENTER
ENTER
Highlight
DELETE LFIXES
Press ENTER
ENTER
ENTER
MENU
Highlight
CLEAR MENU
Press ENTER
ENTER
Highlight
DELETE TRACK
Press ENTER
ENTER ENTER