Filter
Top Products
37
The receiver gives you one last chance to change your mind. Press
ENTER to confirm. The leg is removed from the route. Press any
function key to abort the process.
Adding a Leg
You can add a leg to the end of the route in much the same way as you
would insert a leg, only this time you add a waypoint to extend the end
of the route beyond the original destination.
Access the
ROUTE
MENU
Use ARROW KEYS
to highlight route to
be edited
ENTER
Highlight
EDIT
Press ENTER
Use UP/DOWN
ARROWs to select
the last route leg
ENTER
Highlight
ADD LEG
Press ENTER
ENTER
Use LEFT/RIGHT
ARROWs to select
"TO" waypoint
Access the ROUTE MENU and highlight the route to be edited. Press
ENTER to bring up the pop-up menu, highlight EDIT, and press ENTER.
Use the UP/DOWN ARROWs to view the last leg in the route. Press
ENTER to access the EDIT LEG menu, select ADD LEG, and press
ENTER.
If ADD LEG does not appear as an option of the Leg Edit menu,
you were not viewing the final leg of the route. To add a leg to
the end of a route, you must be viewing the final leg when you
access the Leg Edit menu. (To add a leg within a route, see
Inserting a Leg in a Route.)
The ADD LEG screen appears with the
destination waypoint of the route in the
FROM field. It is used as the starting
point of the final leg you wish to create.
A highlight bar appears for you to select
the new TO waypoint for this leg.
Use the LEFT/RIGHT ARROWs to scroll
through the waypoint list to the
waypoint you wish to use as the
destination for this new final leg and
press ENTER.
The new leg has now been added. The receiver displays the bearing
and distance for this new final leg.
ADD LEG 4
FROM FISH
TO
BRG
3.87
n
m
DST
287`
WPOO1