Filter
Top Products
47
MENU
Highlight
SETUP
Press ENTER
Highlight
PLOT SETUP
Press ENTER
Use UP/DOWN ARROWS to
select ORIENTATION;
HEADING UP or NORTH UP
ENTER
Use LEFT/RIGHT ARROWS
to select TRACK; OFF, 0.1,
0.5, 1.0, or 5.0 NM
Sampling
Sampling causes the receiver to turn itself on every 10 minutes, 20
minutes, 30 minutes, or 1 hour, compute a position fix, store the fix in
the last fix buffer, and then turn itself off.
In order to use Sampling, the receiver’s antenna must remain in an
open area and fully visible to the sky. If the antenna is blocked so that
the receiver cannot acquire sufficient satellites the receiver will be unable
to compute a position fix and the receiver will remain on until the
obstruction is removed.
When Sampling is on, a warning message appears on the POWER DOWN
screen to remind you that you have Sampling on.
Sampling will continue until it is turned off or until the battery warning
is displayed.
When the unit is turned on again, a message will appear requiring you
to confirm whether you want SAMPLING on or off. Select ON or OFF
using the UP/DOWN ARROWs and press ENTER.
Power Lock
POWER LOCK allows you to safeguard the receiver's battery power in
case of unintentional power-on by requiring a specific key sequence to
confirm. This feature is useful, for example, when POWER key is pressed
accidentally as a result of being stored in a bag, etc.
When POWER LOCK is turned on,
the start-up screens include the
message screen shown at right.
When this key sequence is pressed,
the receiver continues to POSITION
screen or the initialization screens.
If any other key any is pressed, the
unit turns off instantly.
MENU
Highlight
SETUP
Press ENTER
Highlight
SAMPLING
Press ENTER
Use UP/DOWN ARROWS to
select OFF, 10 MINUTES,
20 MINUTES, 30 MINUTES,
1 HOUR
ENTER
MENU
Highlight
SETUP
Press ENTER
Highlight
POWER LOCK
Press ENTER
Use UP/DOWN
ARROWS to select
OFF or ON
ENTER
PRESS
MENU THEN
RIGHT ARROW
THEN ENTER
TO CONTINUE