Filter
Top Products
50
With the alarm menu displayed, you can turn an alarm on or off by
pressing the ENTER key.
If you turn on the ANCHOR, XTE or arrival alarms, you will have the
option of changing the radius of the selected alarm. The default is set
at 200 feet. If an alarm is turned on it will be preceded by a √ (check
mark). Use the LEFT/RIGHT ARROWs to turn alarms on and off.
Press ENTER, and use the UP/DOWN and LEFT/RIGHT ARROWs to
set radius of a selected alarm. To exit the ALARM MENU, highlight
ESCAPE and press ENTER.
Viewing the SUN/MOON Screen
This screen will display the time of sunrise and sunset for the chosen
waypoint. It also graphically displays the lunar cycle of the moon.
MENU
Highlight
WAYPOINTS
Press ENTER
Use ARROW
KEYS to select
waypoint
ENTER
Highlight
SUNRISE
Press ENTER
Use ARROW
KEYS to select
date to view
ENTER
Press MENU, use the UP/DOWN ARROWs to select WAYPOINTS
and press ENTER. Select the waypoint in the list for which you wish
to view sunrise information, then press ENTER to access the
WAYPOINT screen. Now press ENTER to access the function menu,
highlight SUNRISE and press ENTER.
The first step in viewing the solar and
lunar information is to enter the date
for which you want the information.
Use the UP/DOWN and LEFT/RIGHT
ARROWs to set the date and press
ENTER.
The receiver will compute the sunrise,
sunset, and lunar cycle for the waypoint
chosen on the date you entered.
Full moon
Half moon
New moon
JETTY
04OCT96
SUN ^ 06:47AM
SUN & 06:32PM
MOON
JETTY
06OCT96
SUN^
SUN&
MOON