Filter
Top Products
23
The Browse Music Files screen, at left. The Browse Music Files virtual
keyboard is shown at right.
Music Mode Practice Run
The following is a 10-step "Practice Run" that will walk you through
the most basic Music Mode operations. Follow these steps to start lis-
tening to music files. Start at your home computer. You will need some
MP3 or Ogg Vorbis music files.
1. Connect the iWAY to your home computer using the USB-to-PC ca-
ble connect. Turn the unit on.
2. Your computer should read the iWAY as if it were an external de-
vice; just like a card reader or external hard drive. Browse to the iWAY
on your computer. If you are using a PC you should open up My Com-
puter and look for a drive named "iWay600c." If you are using a Mac,
the iWAY should show up as a disc on the desktop. Now copy the music
files to the unit by either "dragging or dropping" the files straight to
the unit or you can "copy and paste" them. With Mac systems, when
you are done "browsing", you should eject the disc before unplugging
the unit from the computer; or you can turn off the iWAY. An easy way
to eject the disc is to drag it to the trash.
3. Once the music files are copied, turn the unit off and disconnect the
unit from the computer.
4. Move the unit to your vehicle and turn the unit on.
5. Press the
MAP/MUSIC button and select Music Mode.
6. Touch the screen inside the Now Playing box to view the music files
stored on the unit. Use the touch screen to highlight and select a song
from the list. The song should begin playing.
7. If you haven’t changed the output mode, the audio should be playing
through the power cord's built-in speaker or through headphones, if
attached.