Filter
Top Products
Check the pine tree fasteners in the A-Frame panels for security.
Inspect the roll ring system for wear and security.
Inspect the pitch rings and torque arms for security and wear.
3. Projection and Audio Equipment
Visually inspect the projection equipment and speaker mounting fasteners.
Check the fans and ducting for condition and security.
Check the projector for proper operation, cleanliness and security.
Check speakers and audio equipment for security and proper functioning.
Check the projection controls for proper operation.
Check the projection screen for proper mounting, cleanliness and security.
4. Electrical Equipment
Check the ride related distribution equipment.
Check for proper use of GFCI’s and grounding.
Visually inspect the lighting for proper operation and damage protection.
Visually inspect the condition of the conduit, wiring and connections.
Check for proper condition, operation and labeling of control stations.
Check for accessibility for authorized personnel and guarding against guest access.
Check for proper operation of the control system in the normal operation mode.
Check the monitor and keyboard for normal operation and condition.
Inspect the electrical safety guards and warning signs.
Check the electrical connections in the power box for security.
Verify the proper operation of the limit sensors. (2 up, 1 down, 1 canopy and 1 demo
sensor.
Check the slip rings for any external damage. Inspect cabling going to and coming
from rings for damage.
Check Power Relay Contactor inside power box for security and operation.
Check all connections inside the power box for security and/or damage.
Check all inverters for proper mounting.
Check power box cover for warning label.
Check condition and operation of power box vent fan.