Filter
Top Products
Page 4-20 500 SERIES INSTALLATION MANUAL
Rev G P/N 190-00181-02
4.10.3 DME Tuning Configuration
Refer to section 5.2.11 for the DME tuning configuration.
4.10.4 DME Tuning Calibration and Checkout
None.
4.10.5 DME Tuning Interconnect
Refer to Figure 4-22 on page 4-63 for the King Serial Panel DME tuning interconnect. Refer to Figure 4-
23 on page 4-65 for the King Serial Remote DME tuning interconnect. Refer to Figure 4-24 on page 4-67
for the parallel 2 of 5 DME tuning interconnect. Refer to Figure 4-25 on page 4-69 for the parallel
BCD/Slip Code DME tuning interconnect.
NOTE
For the GNS 530 to tune a Narco DME 890 or IDME 891 or an ARC (Cessna) RTA-576A using parallel 2
of 5, unique wiring and configuration are required. Refer to section 5.2.11 on page 5-12 and Figure 4-24
on page 4-67.