Filter
Top Products
3-38
Garmin G600 Pilot’s Guide
190-00601-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Class B/TMA Airspace Viewing Range
The Class B/TMA airspace viewing range option allows you to select the map
range and below where Class B/TMA airspace information will appear on the
MFD. Map ranges above the selected value will not show Class B/TMA airspace
information. When Off is selected, the information will not be shown.
Figure 3-49 Navigation Map Class B/TMA Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Aviation Group active,
turn the large MFD knob to highlight the “
Class B/TMA
Viewing Range”
option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.