Filter
Top Products
4-33190-00601-02 Rev. B
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
4.4.5.2 NEXRAD Data Viewing Range
The NEXRAD Viewing Range option allows you to select the map range where
below that value NEXRAD weather products will be shown on the selected MFD
Wx Data Link Map page (1, 2, or 3). When Off is selected, NEXRAD weather
will not be shown.
Figure 4-17 NEXRAD Viewing Range Selection
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page
Menu Options
. The cursor flashes on the
“Weather Setup” option. Press ENT
.
2) The NEXRAD Data Viewing Range value will be highlighted. Turn the small
MFD knob to highlight the desired value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.