Filter
Top Products
3-30
Garmin G600 Pilot’s Guide
190-00601-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
NEXRAD Cell Movement
The NEXRAD Cell Movement option allows you to select the map range
where below that value NEXRAD Cell Movement will appear on the MFD. Map
ranges above the selected value will not show NEXRAD Cell Movement. When
Off is selected, NEXRAD Cell Movement will not be shown.
Figure 3-40 NEXRAD Cell Movement Selection
1) While viewing the Navigation Map Setup page and the Weather Group active,
turn the large MFD knob to highlight the “NEXRAD Cell Movement” option.
2) Turn the small MFD knob to turn the function on or off.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.